Products Description

The EMS3-70-A is a Type 2 7kW EV Home Charger for single-phase homes where a 32A circuit is available. It comes with a 4.3-inch display, IP55 protection, and Type 2 or GB/T connector options. The unit is wall-mounted, CE and RoHS certified, and includes smart thermal protection that pauses charging if the internal temperature rises too high
Features

- This Type 2 7kW EV Home Charger stands out for its 4.3-inch screen, which is larger than the displays found on most 7kW home units. Voltage, current, charging status, and fault messages are easy to read from a standing position or through a car window, which matters in a dark garage or bright outdoor driveway.
- Smart thermal protection monitors the internal temperature continuously. If the charger gets too hot, it cuts power automatically and resumes when the temperature returns to a safe range. This reduces the risk of heat-related failures in enclosed spaces or during long summer charging sessions.
- Bluetooth is built in for local setup and diagnostics. Installers can check parameters and read fault logs without opening the housing. WiFi and 4G modules are optional for remote monitoring and firmware updates, but the charger does not depend on a cloud connection to operate.
- The charger supports delayed charging up to 12 hours, so homeowners can set the car to charge during off-peak hours and avoid paying peak rates. The schedule can be set from the screen or through the app when a communication module is installed.
- The TPE/TPU cable stays flexible down to -20°C, and the IP55 housing protects against rain and dust. The unit is designed for outdoor mounting on a driveway wall or inside a garage, without needing an extra weather cover.
- The factory produces the EMS3-70-A under the same quality system used for commercial charging equipment, with three inspection stages before shipment. CE and RoHS documentation is provided for distributors and installers.

Use case and certifications
Use case
A homeowner in Finland installed this Type 2 7kW EV Home Charger on the exterior wall of a detached house, next to the driveway. The 4.3-inch display is large enough to read from the driver's seat, so the owner can confirm charging has started without walking back to the charger. In winter, the thermal protection prevents overheating even though the charger is mounted in a sheltered but cold outdoor space. The owner uses the delayed start function to charge after 22:00, when the electricity price drops. Because the charger has Bluetooth, the installer was able to run a quick diagnostic during commissioning without connecting a laptop or opening the unit. The owner later added the 4G module to receive firmware updates and check charging history from a phone.

certifications
The EMS3-70-A carries CE and RoHS certifications and an IP55 rating for outdoor use. The unit is tested for overcurrent, overvoltage, undervoltage, and temperature protection. Certification documents and test reports are available before order confirmation.

Parameter
| Specification | |
| Model | EMS3-70-A |
| Electric Properties | |
| Input/Output Voltage | AC 220V |
| Input/Output Current | 32A |
| Rated Power | 7kW |
| Working Frequency | 50/60Hz |
| Phase | Single Phase |
| Structure Design | |
| Display Screen | 4.3-inch |
| Cable Size | Blue Industrial Plug 3x6+1x0.5mm² |
| Dimension | 210x400x100mm |
| Housing Color | Optional |
| Jacket Material | TPE/TPU |
| Control System | |
| Authentication Methods | Plug-and-play, RFID card, Bluetooth, WiFi |
| Security Protection | |
| Certification | CE, RoHS |
| Output Connector | Type 2, GB/T |
| Input Plug | Type 2, GB/T |
| Waterproof Grade | IP55 |
| Working Temperature | ﹣20℃-﹢50℃ |
Package way

Shipping way

FAQ
Q: What information does the 4.3-inch display show during a normal charging session?
A: The screen shows live voltage, current, charging power, session duration, and any active fault codes. It also displays the configured charging mode and the status of the delayed start timer if one is set.
Q: How does the thermal protection behave in hot weather?
A: If the internal temperature exceeds the safe limit, the charger stops output and the display shows a temperature warning. Once the unit cools down to a normal range, charging resumes automatically. This prevents permanent damage and reduces the risk of fire in enclosed or sun-exposed installations.
Q: Is the Bluetooth connection always active, or does it need to be enabled manually?
A: Bluetooth is active by default for local configuration and diagnostics. It has a limited range, typically a few meters, so it is intended for use near the charger rather than remote control. The connection does not interfere with normal charging.
Q: Can the optional 4G module be added later if the customer changes their mind?
A: The 4G module is installed during production, so it should be ordered with the charger. Adding it later requires opening the housing and is not recommended for end users. For future-proofing, we suggest ordering the WiFi or 4G version at the start.
Q: Does the charger require a special type of cable for the 32A circuit?
A: The charger is supplied with a blue industrial plug and a 3×6mm² cable. The installation circuit must be protected by a suitable 32A breaker and an RCD. An electrician should confirm the existing wiring is adequate for continuous 32A load, especially in older buildings.
Hot Tags: Type 2 7kW EV Home Charger, China Type 2 7kW EV Home Charger manufacturers, suppliers, factory, charging of ev car, 3 phase portable ev charger, Type 2 Home Charging Point, Type 2 EV Home Charger, electric car charger 22kw, Electric Vehicle Home Charging Points







