Products Description

The EMS3-110-B is an 11kW 3 Phase Wall-Mounted Electric Car Charger designed for small commercial and shared residential locations that have a three-phase 380V supply. It draws 16A per phase and comes with a 4.3-inch display, RFID card reader, and optional Bluetooth, WiFi, or 4G connectivity. The charger is IP55 rated and carries CE and RoHS certifications.
Core selling points


1
This 11kW 3 Phase Wall-Mounted Electric Car Charger uses a 16A three-phase circuit to deliver 11kW, which is often easier to install in existing buildings than a 32A single-phase line. Many commercial spaces and apartment blocks already have three-phase distribution, so the charger can connect without major panel upgrades.
2
The charger supports Bluetooth as standard for short-range configuration, with optional WiFi or 4G modules for remote monitoring, firmware updates, and backend management. This makes it suitable for operators who want to manage multiple charging points without visiting each unit.
3
A 4.3-inch full-color display shows voltage, current, charging status, energy consumption, and fault codes on the unit itself. In shared parking areas, users can see at a glance whether the charger is active or if a session has stopped.
4
RFID authentication controls access, so only registered cards can start a charge. This is useful for apartment buildings, company parking lots, or small public areas where charging should be limited to authorized users.
5
The wall-mounted design keeps the charger off the ground, and the installation uses an upper mounting plate with expansion bolts. A floor-standing option can be discussed for locations without a suitable wall, though the standard version is wall-mounted.
6
The TPE/TPU cable stays flexible from -20°C to +50°C, and the IP55 housing protects against rain and dust, allowing outdoor installation without an extra shelter.
Use case and certifications

Use case
A technology park in Germany installed this 11kW 3 Phase Wall-Mounted Electric Car Charger in the underground parking area for employees and visitors. The building already had a three-phase supply, so the chargers were connected to the existing distribution boards without running new high-current single-phase cables. Employees use RFID cards to activate charging, and the facility manager monitors the units through the optional 4G connection, checking session data and firmware versions remotely. The 4.3-inch display helps drivers confirm that charging has started, and the IP55 housing protects the units from occasional water spray from parked cars.
Compliance and certifications
The EMS3-110-B carries CE and RoHS certifications and an IP55 rating for outdoor and semi-outdoor installation. The unit is tested for overcurrent, overvoltage, undervoltage, and temperature protection. Certification documents and test reports are available for distributors, installers, and commercial project owners.

Parameter
| Specification | |
| Model | EMS3-110-B |
| Electric Properties | |
| Input/Output Voltage | AC 380V |
| Input/Output Current | 32A |
| Rated Power | 11kW |
| Working Frequency | 50/60Hz |
| Phase | 3 Phase |
| Structure Design | |
| Display Screen | 4.3-inch |
| Cable Size | Red Industrial Plug 5x6+1x0.5mm² |
| Dimension | 210x400x100mm |
| Housing Color | Optional |
| Jacket Material | TPE/TPU |
| Control System | |
| Authentication Methods | Plug-and-charge, RFID card, Bluetooth, WiFi |
| Security Protection | |
| Certification | CE, RoHS |
| Output Connector | Type 2, GB/T |
| Input Plug | Type 2, GB/T |
| Waterproof Grade | IP55 |
| Working Temperature | ﹣20℃-﹢50℃ |
Installation Guide
Step1: Prepare Tools and Accessories
Electric drill, M8 drill bit and expansion bolts (M8 sleeve + M5 screw) with a recommend 35mm drilling depth.
Step2: Install the Upper Mounting Plate
Align the upper mounting plate on the wall, mark the holes, drill, and secure it with expansion bolts.
Step3: Assemble the Main Unit
Attach the lower mounting plate to the main unit and install the wall-hanging screws. The unit is now ready to be hung onto the upper mounting plate.
Step4: Hang and Secure the Main Unit
Hang the main unit onto the upper mounting plate. Then mark the lower holes, drill, and fix the lower mounting plate firmly to the wall.
Step1: Prepare Tools and Accessories
Electric drill, M6 drill bit and expansion bolts (M6 sleeve + M4 screw) with a recommend 25mm drilling depth.
Step2: Position and Fix the Gun Holder
Place the gun holder on the wall and mark four mounting holes. Then drill holes and secure the gun holder with expansion bolts.
Package way

Shipping way

FAQ
Q: Is the 4G module installed by default, or is it an optional extra?
A: The standard version includes Bluetooth. WiFi and 4G modules are optional and can be factory-installed before shipment. If you plan to manage the charger remotely, please specify the required communication module at order stage.
Q: Can the charger be installed on a floor-standing pedestal instead of a wall?
A: The standard design is wall-mounted, but we can supply a compatible floor-standing pedestal as an optional accessory for bulk orders. The pedestal uses the same mounting pattern, so no extra drilling into the wall is needed.
Q: How is the charger configured for a shared apartment building?
A: The RFID reader can be programmed with cards for each resident. The charger does not handle billing by itself, but it can be connected to a management platform through WiFi or 4G if usage tracking is needed. For simple access control, the RFID function works standalone.
Q: Does the charger require a neutral wire in the three-phase supply?
A: Most three-phase installations use five wires, including neutral. The charger's input requirements should be confirmed by a qualified electrician based on local regulations. The standard cable is 5×6mm², which includes a protective earth conductor.
Q: What tools are needed for the wall-mounted installation?
A: The installation guide recommends an electric drill, M8 drill bit, and M8 expansion bolts for the main unit. The charging gun holder uses M6 expansion bolts. A qualified electrician should handle the electrical connection and mounting to ensure safety.
Hot Tags: 11kW 3 Phase Wall-Mounted Electric Car Charger, China 11kW 3 Phase Wall-Mounted Electric Car Charger manufacturers, suppliers, factory, charging of ev car, 3 phase portable ev charger, Type 2 Home Charging Point, Type 2 EV Home Charger, electric car charger 22kw, Electric Vehicle Home Charging Points







